D-Link xStack DGS-3420 Series Reference Manual page 554

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
45-27 clear jwac auth_state
Description
This command is used to clear authentication entries.
Format
clear jwac auth_state [ports [all | <portlist>] {authenticated | authenticating | blocked} |
mac_addr <macaddr>]
Parameters
ports - Specify the port range to delete hosts on.
all - Specify to delete all ports.
<portlist> - Specify range of ports to delete.
authenticated - (Optional) Specify the state of host to delete.
authenticating - (Optional) Specify the state of host to delete.
blocked - (Optional) Specify the state of host to delete.
mac_addr - Delete a specified host with this MAC address.
<macaddr> - Enter the MAC address here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete authentication entries:
DGS-3420-28SC:admin#clear jwac auth_state ports all blocked
Command: clear jwac auth_state ports all blocked
Success.
DGS-3420-28SC:admin#
45-28 config jwac authenticate_page
Description
This command is used by administrators to decide which authenticate page to use.
Format
config jwac authenticate_page [japanese | english]
549