D-Link xStack DGS-3420 Series Reference Manual page 617

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
<ipif_name 12> - (Optional) Enter the IP interface name used for this configuration here. This
name can be up to 12 characters long.
Restrictions
None.
Example
To show the information of the loopback interface named loopback1:
DGS-3420-28SC:admin# show loopback ipif loopback1
Command: show loopback ipif loopback1
Loopback Interface
Interface Admin State
IPv4 Address
Total Entries:1
DGS-3420-28SC:admin#
53-4 delete loopback ipif
Description
This command is used to delete a loopback interface.
Format
delete loopback ipif [<ipif_name 12> | all]
Parameters
<ipif_name 12> - Enter the IP interface name used for this configuration here. This name can be
up to 12 characters long.
all – Specifies that all the IP loopback interfaces will be deleted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete the loopback interface named loopback1:
: loopback1
: Enabled
: 10.0.0.1/8 (MANUAL)
612