D-Link xStack DGS-3420 Series Reference Manual page 328

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
22-30 show dhcp pool manual_binding
Description
This command is used to display the configured manual binding entries.
Format
show dhcp pool manual_binding {<pool_name 12>}
Parameters
<pool_name 12> - (Optional) Specify the DHCP pool name.
Restrictions
None.
Example
To display the configured manual binding entries:
DGS-3420-28SC:admin#show dhcp pool manual_binding
Command: show dhcp pool manual_binding
Pool Name IP Address
------------ ------------- ------------------ --------
p1 192.168.0.1
p1 192.168.0.2
Total Entries : 2
DGS-3420-28SC:admin#
22-31 enable dhcp_server
Description
This command is used to enable the DHCP server function.
If DHCP relay is enabled, DHCP server cannot be enabled. The opposite is also true. For Layer 2
switches, if DHCP client is enabled on the only interface, then DHCP server cannot be enabled. For
layer 3 switches, when the System interface is the only interface then can DHCP client be enabled. If
the DHCP client is enabled, then the DHCP server cannot be enabled.
Format
enable dhcp_server
Hardware Address
00-80-C8-08-13-88
00-80-C8-08-13-99
323
Type
Ethernet
Ethernet