D-Link xStack DGS-3420 Series Reference Manual page 994

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To upload firmware image to an RCP server:
DGS-3420-28SC:admin#upload firmware_toRCP rcp: rcp_user@172.18.212.106/DGS-3420.had
src_file 2.00.009.had
Command: upload firmware_toRCP rcp: rcp_user@172.18.212.106/DGS-3420.had src_file
2.00.009.had
Connecting to server............... Done.
Upload firmware.................... Done.
DGS-3420-28SC:admin#
29-8 upload log_toRCP
Description
This command is used to upload a log file from the device to a Remote Copy Protocol (RCP) server.
Format
upload log_toRCP [{username <username>} {<ipaddr>} dest_file <path_filename 64> | rcp:
<string 128>]
Parameters
username - (Optional) Specify the remote user name on the RCP server.
<username> - Specify the remote user name on the RCP server.
<ipaddr> - (Optional) Specify the IP address of the RCP server.
dest_file - Specify the path name of the RCP server. Note: If a user specifies the relative file path,
the path search strategy will depend on the server system. For some systems, the current user
working directory will be searched first, followed by the environment paths.
<path_filename 64> - Specify the path name of the RCP server.
rcp: - Specify the path name on the RCP server.
<string 128> - Specify the path name on the RCP server. Syntax: rcp:
username@ipaddr/directory/filename. Example for full path:
user_name@10.1.1.1/home/user_name/desxxxx.had. Example for relative path:
user_name@10.1.1.1./desxxxx.had. Note: No spaces are allowed in the whole <string>.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To upload the log from the device to an RCP server:
989