xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
4-6
show port dot1v
Description
This command is used to display the VLAN to be associated with untagged packets ingressed from a
port based on the protocol group.
Format
show port dot1v {ports <portlist>}
Parameters
ports - (Optional) Specify a range of ports to be displayed.
<portlist> - Specify a range of ports to be displayed.
Note: If no parameter is specified, information for all ports will be displayed.
Restrictions
None.
Example
To display the protocol VLAN information for ports 1 to 2:
DGS-3420-28SC:admin# show port dot1v ports 1-2
Command: show port dot1v ports 1-2
Port: 1
Protocol Group ID
-------------------
1
Port: 2
Protocol Group ID
-------------------
1
Total Entries
:
DGS-3420-28SC:admin#
VLAN Name
---------------------------------
default
VLAN Name
---------------------------------
default
2
795
Protocol Priority
-----------------
-
Protocol Priority
-----------------
1