D-Link xStack DGS-3420 Series Reference Manual page 160

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure a static ARP entry for the IP address 10.48.74.121 and MAC address 00:50:BA:00:07:36:
DGS-3420-28SC:admin#config arpentry 10.48.74.121 00-50-BA-00-07-36
Command: config arpentry 10.48.74.121 00-50-BA-00-07-36
Success.
DGS-3420-28SC:admin#
7-4 config arp_aging time
Description
This command is used to set the maximum amount of time, in minutes, that an ARP entry can remain
in the switch's ARP table, without being accessed, before it is dropped from the table.
Format
config arp_aging time <min 0-65535>
Parameters
<min 0-65535> - The ARP age-out time, in minutes. The default is 20 minutes. The range is 0 to
65535 minutes.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the ARP aging time:
DGS-3420-28SC:admin#config arp_aging time 30
Command: config arp_aging time 30
Success.
DGS-3420-28SC:admin#
155