Disable Ssl - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3420-28SC:admin#
To enable SSL:
DGS-3420-28SC:admin# enable ssl
Command: enable ssl
Note: Web will be disabled if SSL is enabled.
Success.
DGS-3420-28SC:admin#
18-3

disable ssl

Description
This command is used to disable the SSL feature and supported ciphersuites.
Format
disable ssl {ciphersuite {RSA_with_RC4_128_MD5 | RSA_with_3DES_EDE_CBC_SHA |
DHE_DSS_with_3DES_EDE_CBC_SHA | RSA_EXPORT_with_RC4_40_MD5}(1)}
Parameters
ciphersuite - (Optional) This is used for configuring cipher suite combination.
RSA_with_RC4_128_MD5 - Indicate an RSA key exchange with RC4 128 bits encryption and
MD5 hash.
RSA_with_3DES_EDE_CBC_SHA - Indicate an RSA key exchange with 3DES_EDE_CBC
encryption and SHA hash.
DHE_DSS_with_3DES_EDE_CBC_SHA - Indicate a DH key exchange with 3DES_EDE_CBC
encryption and SHA hash.
RSA_EXPORT_with_RC4_40_MD5 - Indicate an RSA_EXPORT key exchange with RC4 40 bits
encryption and MD5 hash.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the SSL ciphersuite for RSA_with_RC4_128_MD5:
DGS-3420-28SC:admin# disable ssl ciphersuite RSA_with_RC4_128_MD5
Command: disable ssl ciphersuite RSA_with_RC4_128_MD5
Success.
DGS-3420-28SC:admin#
925