D-Link xStack DGS-3420 Series Reference Manual page 43

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Capability
AdminCrlDir
OpenCrlDir
Port Control
QuietPeriod
TxPeriod
SuppTimeout
ServerTimeout
MaxReq
ReAuthPeriod
ReAuthenticate
Forward EAPOL PDU On Port
Max User On Port
DGS-3420-28SC:admin#
3-8 config 802.1x capability ports
Description
This command is used to configure port capability.
Format
config 802.1x capability ports [<portlist> | all] [authenticator | none]
Parameters
<portlist> - Specify a range of ports to be configured.
all - Specify to configure all ports.
authenticator - The port that wishes to enforce authentication before allowing access to services
that are accessible via that port adopts the authenticator role.
none – Disable authentication on specified port.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure port capability for ports 1 to 10:
DGS-3420-28SC:admin#config 802.1x capability ports 1-10 authenticator
Command: config 802.1x capability ports 1-10 authenticator
Success.
: None
: Both
: Both
: Auto
: 60 Seconds
: 30 Seconds
: 30 Seconds
: 30 Seconds
: 2 Times
: 3600 Seconds
: Disabled
: Enabled
: 10
38