Config Dscp Trust - D-Link xStack DGS-3420 Series Reference Manual
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3420-28SC:admin#show dscp map 1:1 dscp_dscp
Command: show dscp map 1:1 dscp_dscp
DSCP to DSCP Mapping:
--------------------------------------------------------------
Port 1:1
|
0
-----------+--------------------------------------------------
0 |
0
1 |
10
2 |
20
3 |
30
4 |
40
5 |
50
6 |
60
--------------------------------------------------------------
DGS-3420-28SC:admin#
5-18
config dscp trust
Description
This command is used to configure the state of DSCP trust per port. When DSCP is not trusted,
802.1p is trusted.
Format
config dscp trust [<portlist> | all] state [enable | disable]
Parameters
<portlist> - Enter the list of port used for this configuration here.
all - Specify that the command apply to all ports on the Switch.
state - Enable or disable to trust DSCP. By default, DSCP trust is disabled.
enable - Specify that the DSCP trust state will be enabled.
disable - Specify that the DSCP trust state will be disabled.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
Enable DSCP trust on ports 1:1-1:8.
1
2
3
4
1
2
3
4
11
12
13
14
21
22
23
24
31
32
33
34
41
42
43
44
51
52
53
54
61
62
63
5
6
7
8
5
6
7
8
15
16
17
18
25
26
27
28
35
36
37
38
45
46
47
48
55
56
57
58
812
9
9
19
29
39
49
59
Advertisement
Table of Contents
