D-Link xStack DGS-3420 Series Reference Manual page 298
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Command: config dhcp_relay option_82 remote_id user_define D-Link Switch
Success.
DGS-3420-28SC:admin#
21-15 config dhcp_relay option_82 state
Description
This command is used to configure the state of the DHCP relay agent information Option 82 of the
switch. The default settings is disabled.
Format
config dhcp_relay option_82 state [enable | disable]
Parameters
enable - When the state is enabled, the DHCP packet will be inserted with the Option 82 field before
being relayed to server. The DHCP packet will be processed based on the behavior defined in the
check and policy setting.
disable - When the state is disabled, the DHCP packet will be relayed directly to the server without
further check and processing of the packet.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the state of the DHCP relay agent information Option 82:
DGS-3420-28SC:admin#config dhcp_relay option_82 state enable
Command: config dhcp_relay option_82 state enable
Success.
DGS-3420-28SC:admin#
21-16 enable dhcp_relay
Description
This command is used to enable the DHCP relay function on the switch.
Format
enable dhcp _relay
293
Advertisement
Table of Contents
