D-Link xStack DGS-3420 Series Reference Manual page 990
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
src_file - (Optional) Specify an absolute path name on the device file system. If the path name is
not specified, it refers to the boot up image.
<pathname> - Specify an absolute path name on the device file system. If the path name is
not specified, it refers to the boot up image.
Restrictions
Only Administrator, Operator level users can issue this command.
Example
To upload firmware from a file system device to a TFTP server:
DGS-3420-28SC:admin#upload firmware_toTFTP 10.1.1.1 dest_file D:\firmware.had
src_file 2.00.009.had
Command: upload firmware_toTFTP 10.1.1.1 dest_file D:\firmware.had src_file
2.00.009.had
Connecting to server.................. Done.
Upload firmware....................... Done.
DGS-3420-28SC:admin#
To upload the current configuration file to a TFTP server:
DGS-3420-28SC:admin#upload cfg_toTFTP 10.48.74.121 dest_file c:\cfg\DGS-3420.cfg
Command: upload cfg_toTFTP 10.48.74.121 dest_file c:\cfg\DGS-3420.cfg
Connecting to server.................. Done.
Upload configuration.................. Done.
DGS-3420-28SC:admin#
To upload all logs to a TFTP server:
DGS-3420-28SC:admin#upload log_toTFTP 10.48.74.121 dest_file c:\log\DGS-3420.log
Command: upload log_toTFTP 10.48.74.121 dest_file c:\log\DGS-3420.log
Connecting to server.................. Done.
Upload log............................ Done.
DGS-3420-28SC:admin#
To upload a dangerous log:
DGS-3420-28SC:admin# upload attack_log_toTFTP 10.48.74.121 dest_file c:\alert.txt
Command: upload attack_log_toTFTP 10.48.74.121 dest_file c:\alert.txt
Connecting to server................... Done.
Upload attack log...................... Done.
985
Advertisement
Table of Contents
