D-Link xStack DGS-3420 Series Reference Manual page 532

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To download the DHCP snooping binding table:
DGS-3420-28SC:admin#download address_binding snoop_entry_fromTFTP 10.90.90.6
filename impb.cfg
Command: download address_binding snoop_entry_fromTFTP 10.90.90.6 filename impb.cfg
Connecting to server................... Done.
Download DHCP Snooping Entry................ Done.
DGS-3420-28SC:admin#
44-30 upload address_binding snoop_entry_toTFTP
Description
This command is used to upload DHCPv4 Snooping binding entries by TFTP.
Format
upload address_binding snoop_entry_toTFTP [<ipaddr> | <ipv6addr> | <domain_name 255>]
filename <path_filename 64>
Parameters
<ipaddr> - Enter the IPv4 address of the TFTP server here.
<ipv6addr> - Enter the IPv6 address of the TFTP server here.
<domain_name 255> - Enter the domain name of the TFTP server here. This name can be up to
255 characters long.
filename - Specifies the path of the file located on the TFTP server.
<path_filename 64> - Enter the file path, located on the TFTP server, here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To upload the DHCP snooping binding table:
DGS-3420-28SC:admin#upload address_binding snoop_entry_toTFTP 10.90.90.6 filename
impb.cfg
Command: upload address_binding snoop_entry_toTFTP 10.90.90.6 filename impb.cfg
Connecting to server................... Done.
527