D-Link xStack DGS-3420 Series Reference Manual page 80

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To display all authentication server groups:
DGS-3420-28SC:admin#show authen server_group
Command: show authen server_group
Group Name IP Address
--------------- ---------------
mix_1 10.1.1.222
radius 10.1.1.224
tacacs 10.1.1.225
tacacs+ 10.1.1.226
xtacacs 10.1.1.227
Total Entries : 5
DGS-3420-28SC:admin#
4-20 create authen server_host
Description
This command is used to create an authentication server host. When an authentication server host is
created, the IP address and protocol are the index. That means more than one authentication protocol
service can be run on the same physical host. The maximum supported number of server hosts is 16.
Format
create authen server_host <ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius] {port <int 1-
65535> | [key [<key_string 254> | none] | encryption_key <key_string 344>] | timeout <int 1-255>
| retransmit <int 1-20>}
Parameters
<ipaddr> - Specify the server host's IP address.
protocol - Specify the server host's type of authentication protocol.
tacacs - Specify the server host's authentication protocol TACACS.
xtacacs - Specify the server host's authentication protocol XTACACS.
tacacs+ - Specify the server host's authentication protocol TACACS+.
radius - Specify the server host's authentication protocol RADIUS.
port - (Optional) Specify the port number of the authentication protocol for the server host. The
default value for TACACS/XTACACS/TACACS+ is 49. The default value for RADIUS is 1812.
<int 1-65535> - Specify the port number of the authentication protocol for the server host. The
default value for TACACS/XTACACS/TACACS+ is 49. The default value for RADIUS is 1812.
The port number must be between 1 and 65535.
key - (Optional) Specify the key for TACACS+ and RADIUS authentication.
<key_string 254> - Specify the key for TACACS+ and RADIUS authenticaiton. If the value is null,
no encryption will apply. This value is meaningless for TACACS and XTACACS.
none - No encryption for TACACS+ and RADIUS authenticaiton. This value is meaningless for
TACACS and XTACACS.
Protocol
--------
TACACS+
RADIUS
TACACS
TACACS+
XTACACS
75