D-Link xStack DGS-3420 Series Reference Manual page 758

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
<vidlist> - Specify the VLAN ID.
max_learning_addr - Specify the maximum number of MAC address entries that can be learned
with this VLAN. If this parameter is set to 0, it means that no user can get authorization on this
VLAN. If the setting is smaller than the number of current learned entries on the VLAN, the
command will be rejected.
<max_lock_no 0-3328> - Specify the value between 0 and 3328.
no_limit - Specify the default value is no limit.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the maximum number of entries that can be learned at 64:
DGS-3420-28SC:admin#config port_security vlan vlanid 1 max_learning_addr 64
Command: config port_security vlan vlanid 1 max_learning_addr 64
Success.
DGS-3420-28SC:admin#
68-4 delete port_security_entry
Description
This command is used to delete a port security entry by VLAN, VLAN ID, and MAC address.
Format
delete port_security_entry [vlan <vlan_name 32> | vlanid <vlanid 1-4094>] mac_address
<macaddr>
Parameters
vlan - Specify the VLAN by name.
<vlan_name 32> - Specify the VLAN name. The maximum length is 32 characters.
vlanid - Specify a list of VLANs by VLAN ID.
<vlanid 1-4094> - Specify the VLAN ID. This value must be between 1 and 4094.
mac_address - Specify the MAC address of the entry.
<macaddr> - Specify the MAC address of the entry.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete the port security entry with a MAC address of 00-01-30-10-2c-c7 on the default VLAN:
753