D-Link xStack DGS-3420 Series Reference Manual page 824

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Format
show qinq ports {<portlist>}
Parameters
<portlist> - (Optional) Specify a range of ports to be displayed.
Note: If no parameter specified, the system will display port information for all ports.
Restrictions
None.
Example
To display the Q-in-Q mode for ports 1 to 2:
DGS-3420-28SC:admin#show qinq ports
Command: show qinq ports 1-2
Port ID: 1
---------------------------------------------------------
Role:
Miss Drop:
Outer Tpid:
Use Inner Priority:
Add Inner Tag:
Port ID: 2
---------------------------------------------------------
Role:
Miss Drop:
Outer Tpid:
Use Inner Priority:
Add Inner Tag:
DGS-3420-28SC:admin#
6-8 create vlan_translation ports
Description
This command is used to create translation relationships between C-VLAN and S-VLAN. This setting
will not be effective when the Q-in-Q mode is disabled. This configuration is only effective for a UNI
port. At the UNI port, the ingress C-VLAN tagged packets will be translated to S-VLAN tagged packets
1-2
NNI
Disabled
0x8100
Disabled
Disabled
NNI
Disabled
0x8100
Disabled
Disabled
819