D-Link xStack DGS-3420 Series Reference Manual page 386
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
timeout - Specifies the maximum time waiting for a responce from a specified name server.
<sec 1-60> - Enter the timeout value used here. This value must be between 1 and 60
seconds.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure DNS Resolver name server time out to 10 seconds:
DGS-3420-28SC:admin# config name_server timeout 10
Command: config name_server timeout 10
Success.
DGS-3420-28SC:admin#
28-4
show name_server
Description
This command is used to display the current DNS Resolver name servers and name server time out
on the Switch.
Format
show name_server
Parameters
None.
Restrictions
None.
Example
To display the current DNS Resolver name servers and name server time out:
381
Advertisement
Table of Contents
