D-Link xStack DGS-3420 Series Reference Manual page 339
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
23-2
config filter dhcp_server log
Description
This command is used to enable or disable the log for a DHCP server filter event.
Format
config filter dhcp_server log [enable | disable]
Parameters
enable – Specifies to enable the log for a DHCP server filter event.
disable – Specifies to disable the log for a DHCP server filter event.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the log for a DHCP server filter event:
DGS-3420-28SC:admin#config filter dhcp_server log enable
Command: config filter dhcp_server log enable
Success.
DGS-3420-28SC:admin#
23-3
config filter dhcp_server trap
Description
This command is used to enable or disable the trap for a DHCP server filter event.
Format
config filter dhcp_server trap [enable | disable]
Parameters
enable – Specifies to enable the trap for a DHCP server filter event.
disable – Specifies to disable the trap for a DHCP server filter event.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
334
Advertisement
Table of Contents
