D-Link xStack DGS-3420 Series Reference Manual page 83
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
<ipaddr> - Specify the server host's IP address.
protocol - Specify the server host's type of authentication protocol.
tacacs - Specify the server host's authentication protocol TACACS.
xtacacs - Specify the server host's authentication protocol XTACACS.
tacacs+ - Specify the server host's authentication protocol TACACS+.
radius - Specify the server host's authentication protocol RADIUS.
Restrictions
Only Administrator-level users can issue this command.
Example
To delete an authentication server host:
DGS-3420-28SC:admin#delete authen server_host 10.1.1.222 protocol tacacs+
Command: delete authen server_host 10.1.1.222 protocol tacacs+
Success.
DGS-3420-28SC:admin#
4-23
show authen server_host
Description
This command is used to display authentication server hosts.
Format
show authen server_host
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To display all authentication server hosts:
78
Advertisement
Table of Contents
