D-Link xStack DGS-3420 Series Reference Manual page 403

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
32-3 create erps raps_vlan
Description
This command is used to create an R-APS VLAN on the switch. There should be only one R-APS
VLAN used to transfer R-APS messages. Note that the R-APS VLAN must already have been created
by the create vlan command. This command can only be issued when this ring is disabled or ERPS
globally is disabled.
Format
create erps raps_vlan <vlanid 1-4094>
Parameters
<vlanid 1-4094> - Specify the VLAN which will be the R-APS VLAN.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create an ERPS RAPS VLAN:
DGS-3420-28SC:admin#create erps raps_vlan 4094
Command: create erps raps_vlan 4094
Success.
DGS-3420-28SC:admin#
32-4 delete erps raps_vlan
Description
This command is used to delete an R-APS VLAN on the switch. When an R-APS VLAN is deleted, all
parameters related to this R-APS VLAN will also be deleted. This command can only be issued when
this ring is disabled or ERPS globally is disabled.
Format
delete erps raps_vlan <vlanid 1-4094>
Parameters
<vlanid 1-4094> - Specify the VLAN which will be the R-APS VLAN.
398