D-Link xStack DGS-3420 Series Reference Manual page 49

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Format
config 802.1x reauth [port_based ports [<portlist> | all] |mac_based ports [<portlist> | all]
{mac_address <macaddr>}]
Parameters
port_based ports - The switch passes data based on its authenticated port.
<portlist> - Specify a range of ports to be configured.
all - Specify to configure all ports.
mac_based ports - The switch passes data based on the MAC address of authenticated RADIUS
client.
<portlist> - Specify a range of ports to be configured.
all - Specify to configure all ports.
mac_address - (Optional) Specify the MAC address of the authenticated RADIUS client.
<macaddr> - Enter the MAC address here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To reauthenticate the device connected with the port:
DGS-3420-28SC:admin# config 802.1x reauth port_based ports all
Command: config 802.1x reauth port_based ports all
Success.
DGS-3420-28SC:admin#
3-16 create 802.1x guest_vlan
Description
This command is used to assign a static VLAN to be a guest VLAN. The specific VLAN which is
assigned to a guest VLAN must already exist. The specific VLAN which is assigned to the guest VLAN
can't be deleted.
Format
create 802.1x guest_vlan <vlan_name 32>
Parameters
<vlan_name 32> - Specify the static VLAN to be a guest VLAN.
44