D-Link xStack DGS-3420 Series Reference Manual page 793

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
3-9 show ptp p2p_transparent ports
Description
This command is used to display the configured attributes of the P2P transparent clock's special ports.
Format
show ptp p2p_transparent ports [<portlist> | all]
Parameters
ports - Specifies the list of port used for this display.
<portlist> - Enter the list of port used for this display here.
all - Specifies that all the ports will be used for this display.
Restrictions
None.
Example
To show the configured attributes of special ports 1:1-1:4 of the p2p_transparent clock:
DGS-3420-28SC:admin# show ptp p2p_transparent ports 1:1-1:4
Command: show ptp p2p_transparent ports 1:1-1:4
The attribute configuration of the p2p_transparent ports:
PDRI : Pdelay_Request Interval
Port PDRI
1:1 8
1:2 16
1:3 8
1:4 4
DGS-3420-28SC:admin#
3-10 show ptp foreign_master_records ports
Description
This command is used to display the current foreign master data set records of the boundary clock's
special ports.
Format
show ptp foreign_master_records ports [<portlist> | all]
State
Enabled
Enabled
Enabled
Disabled
788