D-Link xStack DGS-3420 Series Reference Manual page 542

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3420-28SC:admin#config jwac quarantine_server_error_timeout 60
Command: config jwac quarantine_server_error_timeout 60
Success.
DGS-3420-28SC:admin#
45-12 config jwac
Description
This command is used to configure the quarantine server URL. If the redirection is enabled and the
redirection destination is a quarantine server, when a HTTP request from an unauthenticated host
which is not headed to a quarantine server reaches the Switch, the Switch will handle this HTTP
packet and send back a message to the host to make it access the quarantine server with the
configured URL. When the PC connected to the specified URL, the quarantine server will request the
PC user to input the user name and password to authenticate.
Note: If the quarantine server is linked to the JWAC enabled port on the switch, it must be
added to the static FDB correctly before it can work properly.
Format
config jwac [quarantine_server_url <string 128> | clear_quarantine_server_url]
Parameters
quarantine_server_url - Specify the entire URL of the authentication page on the quarantine server.
<string 128> - Specify the entire URL of the authentication page on the quarantine server. The
quarantine server URL can be up to 128 characters long.
clear_quarantine_server_url - Specify to clear the current quarantine server URL.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the quarantine server URL:
DGS-3420-28SC:admin#config jwac quarantine_server_url
http://10.90.90.88/authpage.html
Command: config jwac quarantine_server_url http://10.90.90.88/authpage.html
Success.
DGS-3420-28SC:admin#
537