D-Link xStack DGS-3420 Series Reference Manual page 1023

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3420-28SC:admin#
31-7 config voice_vlan aging_time
Description
This command is used to set the aging time of the voice VLAN. The aging time is used to remove a
port from voice VLAN if the port is an automatic VLAN member. When the last voice device stops
sending traffic and the MAC address of this voice device is aged out, the voice VLAN aging timer will
be started. The port will be removed from the voice VLAN after expiration of voice VLAN aging timer. If
the voice traffic resumes during the aging time, the aging timer will be reset and stop.
Format
config voice_vlan aging_time <min 1-65535>
Parameters
<min 1-65535> - Specify the aging time. The range is 1 to 65535 minutes. The default value is 720
minutes.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To set 60 minutes as the aging time of voice VLAN:
DGS-3420-28SC:admin#config voice_vlan aging_time 60
Command: config voice_vlan aging_time 60
Success.
DGS-3420-28SC:admin#
31-8 show voice_vlan
Description
This command is used to display voice VLAN global information.
Format
show voice_vlan
1018