D-Link xStack DGS-3420 Series Reference Manual page 591

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
all - (Optional) Specify that all VLAN names will be transmitted.
<vlan_name 32> - (Optional) Specify a VLAN name to be transmitted.
vlanid - (Optional) Specify a VLAN ID list to be transmitted.
<vidlist> - Specify a VLAN ID list to be transmitted.
enable - Enable configuration of an individual port or group of ports to exclude one or more of
IEEE 802.1 Organizationally VLAN name TLV data types from outbound LLDP
advertisements.
disable - Disable configuration of an individual port or group of ports to exclude one or more of
IEEE 802.1 Organizationally VLAN name TLV data types from outbound LLDP
advertisements.
dot1_tlv_protocol_identity - This TLV optional data type indicates whether the corresponding Local
System's Protocol Identity instance will be transmitted on the port. The Protocol Identity TLV
provides a way for stations to advertise protocols that are important to the operation of the
network, such as Spanning Tree Protocol, the Link Aggregation Control Protocol, and numerous
vendor proprietary variations which are responsible for maintaining the topology and connectivity
of the network. If EAPOL, GVRP, STP (including MSTP), and LACP protocol identity are enabled
on this port and enabled to be advertised, then the protocol identity will be advertised. The default
state is disabled.
all - Advertise all of the protocols lists below.
eapol - (Optional) Advertise EAPOL.
lacp - (Optional) Advertise LACP.
gvrp - (Optional) Advertise GVRP.
stp - (Optional) Advertise STP.
enable - Enable configuration an individual port or group of ports to exclude one or more of IEEE
802.1 Organizationally protocol identity TLV data types from outbound LLDP advertisements.
disable - Disable configuration an individual port or group of ports to exclude one or more of IEEE
802.1 Organizationally protocol identity TLV data types from outbound LLDP advertisements.
dot3_tlvs - An individual port or group of ports to exclude one or more of IEEE 802.3
Organizationally Specific TLV data types from outbound LLDP advertisements.
all – (Optional) Configure all of the TLV optional data types below.
mac_phy_configuration_status - (Optional) This TLV optional data type indicates that LLDP
agent should transmit "MAC/PHY configuration/status TLV." This type indicates it is possible
for two ends of an IEEE 802.3 link to be configured with different duplex and/or speed settings
and still establish some limited network connectivity. More precisely, the information includes
whether the port supports the auto-negotiation function, whether the function is enabled, the
auto-negotiated advertised capability, and the operational MAU type. The default state is
disabled.
link_aggregation - (Optional) This TLV optional data type indicates that LLDP agent should
transmit "Link Aggregation TLV." This type indicates the current link aggregation status of IEEE
802.3 MACs. More precisely, the information should include whether the port is capable of
doing link aggregation, whether the port is aggregated in an aggregated link, and the
aggregated port ID. The default state is disabled.
power_via_mdi - (Optional) This TLV optional data type indicates that LLDP agent should
transmit 'Power via MDI TLV'. The default state is disabled.
maximum_frame_size - (Optional) This TLV optional data type indicates that LLDP agent should
transmit "Maximum-frame-size TLV." The default state is disabled.
enable - Enable the configuration of an individual port or group of ports to exclude one or more of
IEEE 802.3 Organizationally Specific TLV data types from outbound LLDP advertisements.
disable - Disable the configuration of an individual port or group of ports to exclude one or more
of IEEE 802.3 Organizationally Specific TLV data types from outbound LLDP advertisements.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
586