D-Link xStack DGS-3420 Series Reference Manual page 760

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Format
show port_security_entry {ports {<portlist>} {[vlan <vlan_name 32> | vlanid <vidlist>]}}
Parameters
ports - (Optional) Specify a range of ports to be displayed.
<portlist> - Specify a range of ports to be displayed.
vlan - (Optional) Specify a VLAN to display its entry.
<vlan_name 32> - Specify the VLAN name. The maximum length is 32 characters.
vlanid - (Optional) Specify a VLAN list to display its entry.
<vidlist> - Specify a list of the VLAN IDs.
Restrictions
None.
Example
To display a port security entry:
DGS-3420-28SC:admin#show port_security_entry
Command: show port_security_entry
MAC Address
-----------------
00-00-00-00-00-01
Total Entry Number: 1
DGS-3420-28SC:admin#
68-7 show port_security
Description
This command is used to display the port security related information of the switch ports including the
port security admin state, the maximum number of learning addresses, and the lock mode.
Format
show port_security {ports {<portlist>} {[vlan <vlan_name 32> | vlanid <vidlist>]}}
Parameters
ports - (Optional) Specify a range of ports to be displayed.
<portlist> - Specify a range of ports to be displayed.
VID Port Lock Mode
--- ---- ----------
1 25 DeleteOnTimeout
755