D-Link xStack DGS-3420 Series Reference Manual page 300
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
21-18 show dhcp_relay
Description
This command is used to display the current DHCP relay configuration.
Format
show dhcp_relay {ipif <ipif_name 12>}
Parameters
ipif – (Optional) Specify the IP interface name.
<ipif_name 12> - Specify the IP interface name. The IP interface name can be up to 12
characters long.
Note: If no parameter is specified, the system will display all DHCP relay configurations.
Restrictions
None.
Example
To display the DHCP relay status:
DGS-3420-28SC:admin#show dhcp_relay
Command: show dhcp_relay
DHCP/BOOTP Relay Status
DHCP/BOOTP Hops Count Limit
DHCP/BOOTP Relay Time Threshold : 0
DHCP Vendor Class Identifier Option 60 State: Disabled
DHCP Client Identifier Option 61 State: Disabled
DHCP Relay Agent Information Option 82 State
DHCP Relay Agent Information Option 82 Check
DHCP Relay Agent Information Option 82 Policy : Replace
DHCP Relay Agent Information Option 82 Remote ID : D-Link Switch
Interface
Server 1
------------- --------------- ---------------- --------------- --------------
System
10.1.1.1
DGS-3420-28SC:admin#
: Disabled
: 4
: Disabled
: Disabled
Server 2
Server 3
192.168.0.1
295
Server 4
Advertisement
Table of Contents
