D-Link xStack DGS-3420 Series Reference Manual page 32
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To reset all the switch parameters except the IP address:
DGS-3420-28SC:admin#reset
Command: reset
Are you sure you want to proceed with system reset
except IP address, log, user account and banner?(y/n) y
Success.
DGS-3420-28SC:admin#
To reset the system configuration settings:
DGS-3420-28SC:admin#reset config
Command: reset config
Are you sure to proceed with system reset?(y/n)
Success.
DGS-3420-28SC:admin#
To reset all system parameters, save, and restart the switch:
DGS-3420-28SC:admin#reset system
Command: reset system
Are you sure to proceed with system reset, save and reboot?(y/n)
Loading factory default configuration... Done.
Saving all configuration to NV-RAM... Done.
Please wait, the switch is rebooting...
2-23
login
Description
This command is used to log in to the switch.
Format
login
Parameters
None.
27
Advertisement
Table of Contents
