Installing And Removing Ocx1100 Switch Hardware Components; Figure 23: Sliding The Switch Into Rack-Mounting Slider Brackets And Mounting - Juniper OCX1100 Hardware Manual

OCX1100 Switch Hardware Guide
Related
Documentation

Installing and Removing OCX1100 Switch Hardware Components

74
Figure 23: Sliding the Switch into Rack-Mounting Slider Brackets and
Mounting the Switch to the Front Posts of the Rack
Ensure that the switch chassis is level by verifying that all the screws on the front of
8.
the rack are aligned with the screws at the back of the rack.
NOTE: We recommend that you install cover panels in unused fan modules
and power supply slots.
Connecting AC Power to an OCX1100 Switch on page 80
Connecting DC Power to an OCX1100 Switch on page 82
Connecting and Configuring an OCX1100 Switch (CLI Procedure) on page 100
Rack-Mounting and Cabinet-Mounting Warnings on page 148
The OCX1100 switch chassis is a rigid sheet-metal structure that houses the hardware
components. The field-replaceable units (FRUs) in OCX1100 switches are:
Power supplies
Fan modules
Transceivers
The power supplies (AC or DC), fan modules, and transceivers are hot-removable and
hot-insertable: You can remove and replace them without powering off the switch or
disrupting switch functions.
Copyright © 2017, Juniper Networks, Inc.