Installing Switch Components; Installing And Removing Ex8208 Switch Hardware Components - Juniper EX8208 Complete Hardware Manual

CHAPTER 9

Installing Switch Components

Installing and Removing EX8208 Switch Hardware Components

Copyright © 2010, Juniper Networks, Inc.
Installing and Removing EX8208 Switch Hardware Components on page 143
Installing an AC Power Supply in an EX8200 Switch on page 144
Installing a DC Power Supply in an EX8200 Switch on page 146
Installing a Fan Tray in an EX8208 Switch on page 148
Installing an SRE Module in an EX8208 Switch on page 149
Installing an SF Module in an EX8208 Switch on page 151
Unpacking a Line Card Used in an EX8200 Switch on page 153
Installing a Line Card in an EX8200 Switch on page 154
Installing a Transceiver in an EX Series Switch on page 158
Connecting a Fiber-Optic Cable to an EX Series Switch on page 159
The field-replaceable units (FRUs) in an EX8208 switch are:
Switch Fabric and Routing Engine (SRE) module
Switch Fabric (SF) module
8-port SFP+ line card
40-port SFP+ line card
48-port SFP line card
48-port RJ-45 line card
Power supplies (AC and DC)
Fan tray
SFP transceiver
SFP+ transceiver
The SRE module and SF module are hot-removable or hot-pluggable depending on the
configuration of the switch. See "EX8208 Switch Configurations" on page 7.
143