Mac Access-List Extended - Dell MXL 10GbE Reference Manual

mac-
destination-
address-mask
ethertype
operator
count
byte
Defaults Not configured.
Command CONFIGURATION-MAC ACCESS LIST-EXTENDED
Modes
Command
Version 8.3.16.1
History
Related
permit
Commands
seq

mac access-list extended

Name a new or existing extended MAC access control list (extended MAC ACL).
Syntax
mac access-list extended access-list-name [cpu-qos]
Parameters
access-list-
name
cpu-qos
Defaults None
Command CONFIGURATION
Modes
Access Control Lists (ACL)
Specify which bits in the MAC address must match.
The MAC ACL supports an inverse mask; therefore, a mask of
ff:ff:ff:ff:ff:ff allows entries that do not match and a mask of
00:00:00:00:00:00 only allows entries that match exactly.
(OPTIONAL) To filter based on protocol type, enter one of
the following Ethertypes:
• ev2 - is the Ethernet II frame format
• llc - is the IEEE 802.3 frame format
• snap - is the IEEE 802.3 SNAP frame format
(OPTIONAL) Enter the keyword count to count packets
processed by the filter.
(OPTIONAL) Enter the keyword byte to count bytes
processed by the filter.
Introduced on the MXL 10/40GbE Switch IO Module.
— configures a MAC address filter to pass packets.
— configures a MAC address filter with a specified sequence number.
Enter a text string as the MAC access list name, up to 140
characters.
Enter the keyword cpu-qos to assign this ACL to control
plane traffic only (CoPP).
191