Show Processes Cpu (C-Series And E-Series) - Dell Force10 Z9000 Reference Manual

Example
FTOS#show memory stack-unit 0
Statistics On Unit 0 Processor
===========================
Total(b)
268435456 4010354 264425102 264375410 264425102

show processes cpu (C-Series and E-Series)

View CPU usage information based on processes running in the system.
C-Series, E-Series
Syntax show processes cpu [cp | rp1 | rp2] [lp [linecard-number [1-99]
| all | summary]
Parameters
cp
rp1
rp2
lp
lp all
lp summary
Command Modes
Command History
Version 7.5.1.0
Version 7.4.1.0
Version 6.5.1.0
156
Used(b) Free(b)
(OPTIONAL) Enter the keyword cp to view CPU usage of the control
processor.
(OPTIONAL) Enter the keyword rp1 to view CPU usage of the Route
Processor 1.
(OPTIONAL) Enter the keyword rp2 to view CPU usage of the Route
Processor 2.
linecard [ 1-99 ]
(OPTIONAL) Enter the keyword lp followed by the line card number
to display the CPU usage of that line card.
The optional 1-99 variable sets the number of tasks to display in
order of the highest CPU usage in the past five (5) seconds.
(OPTIONAL) Enter the keyword lp all to view CPU utilization on all
active line cards.
(OPTIONAL) Enter the keyword lp summary to view a summary of the
line card CPU utilization.
• EXEC
• EXEC Privilege
Introduced on the C-Series.
Added the lp all option.
The granularity of the output for rp1 and rp2 is changed. The output
is at the process level so process-specific statistics are displayed.
Lowest(b) Largest(b)
NOTE: This option is supported on the E-Series only.