Avaya Communication Manager Administrator's Manual page 1227

Port
This is a display-only field. It shows the port number to which parameters administered on the
row apply.
Side
Valid entries
a
b
Synch Source
The Synch Source field applies only for TN2185 boards.
Note:
For MM720 and MM722 bri media modules, the Synch Source field does not
Note:
appear. For the MM720 and MM722, this parameter is configured using the
gateway CLI.
Valid entries
y
n
T3 Timer Length (sec)
Valid entries
1 to 127
Usage
Determines how glare conditions are handled when Interface field is
peer-slave.
Usage
When set to y, allows a TN2185 board displayed on the Synchronization
Plan screen to be entered as the Primary or Secondary synchronization
source, if at least one of the ports on that board has Synch Source?
enabled. Only those ports marked y are candidates for clock
synchronization with the far-end network.
Usage
Tells the TE side how long to wait, in seconds, for an inactive Layer 1 to
become active.
ISDN-BRI Trunk Circuit Pack
Issue 2.1 May 2006 1227