Screen Reference
System Parameters - Duplication
Use the System Parameters Duplication screen to enable PNC or IPSI duplication.
Field descriptions for page 1
Figure 563: System Parameters - Duplication screen
change system-parameters duplication
Enable Operation of PNC Duplication? y
Enable Operation of IPSI Duplication? y
Enable Operation of IPSI Duplication
Use this field to enable IPSI duplication.
Note:
This field is set to n(o) when either the TN8412AP or TN2312BP circuit pack is
Note:
used in an S8400 configuration. This is because TN8412/TN2312 duplication is
not supported in Phase 1 of the S8400. Duplication may be offered in the future.
Valid entries
y/n
Enable Operation of PNC Duplication
Valid entries
y/n
1552 Administrator Guide for Avaya Communication Manager
DUPLICATION RELATED SYSTEM PARAMETERS
Usage
Enter y to enable IPSI duplication.
Usage
Enter y to enable PNC duplication. Appears when PNC Duplication is y
on the System Parameters Customer Options screen.
Page 1 of x