Avaya Communication Manager Administrator's Manual page 1664

Screen Reference
Seize Ack Send (msec)
This field appears only if the Trunk Type field is dis and the trunk group Direction field is
incoming or two-way. Only TN2140 ports receive this timer.
Valid entries
10 to 990 in
increments of 10
Send Incoming/Outgoing Disconnect Timers to TN465 Ports
The field appears only for a co, fx, or wats trunk group.
Valid entries
y/n
END TO END SIGNALING
Pause (msec)
THis field is administrable only if the Trunk Type field is blank. All CO, DIOD, and tie circuit
packs that accept administrable timers accept this timer. However, this timer is sent only to the
following circuit packs: TN464B (or later), TN767, TN436B, TN459B, TN2146, TN2199, and
TN2242, and TN429 and TN2184 ports in a DID trunk group.
Valid entries
20 to 2550 in
increments of 10
1664 Administrator Guide for Avaya Communication Manager
Usage
Enter the duration of the seizure acknowledgment signal your server
running Communication Manager sends in response to an incoming
seizure.
Usage
Enter y if you want to send the incoming disconnect and outgoing disconnect
timer values to the trunk group ports that are on a TN465 board.
Usage
Enter the minimum acceptable interval (pause) between DTMF tones
sent from a hybrid telephone.