Avaya Communication Manager Administrator's Manual page 1321

Restart ANI from Caller Category
Display-only field.
Valid entries
y/n
Truncate Station Number in ANI
This field applies to Russian shuttle trunks, and MFC and MFE trunks.
Valid entries
beginning
ending
no
INCOMING / OUTGOING
ANI Available
Valid entries
1 to 15 or blank
Usage
If y, Avaya Communication Manager sends the caller-category signal later
again when the signals for Caller-Category and ANI requests are the
same and this signal is received after the Next-Digit forward signals have
been received.
Usage
This field defines the side of the extension number from which to truncate
when station ANI is sent to the CO and the combined length of the ANI
prefix and extension number is greater than Number of Outgoing ANI
Digits. The ANI prefix (either MFC or COR) is not truncated. There is no
effect if ANI for PBX is sent.
Usage
Enter the number of incoming and outgoing ANI-Available signals.
Multifrequency-Signaling-Related Parameters
Issue 2.1 May 2006 1321