Avaya Communication Manager Administrator's Manual page 1293

Voice Paging — COR
This field assigns a Class of Restriction to a paging zone.
Valid entries
0 to 995
blank
Voice Paging — TAC
This field assigns a Trunk Access Code (TAC) to a paging zone. Users dial this code to make a
page to a specific zone. One TAC must be assigned to each zone you want to use. Two zones
cannot have the same TAC. If you enter a TAC in the ALL field, users can activate speakers in
all the zones by dialing that code.
Valid entries
1 to 4 digits
*
#
blank
Voice Paging Timeout (sec)
This field limits the duration of voice pages. When this interval ends, calls are disconnected. To
determine the best setting, time the typical pages you expect to broadcast and then add another
4 to 5 seconds.
Valid entries
10 to 600 seconds
blank
Note:
To use a port that has no hardware associated with it, place an x in this field.
Note:
Usage
You can assign different classes of restriction to different zones.
Leave this field blank for unused paging zones.
Usage
Enter a Trunk Access Code (TAC) allowed by your dial plan.
Can be used as first digit.
Can be used as first digit.
Leave this field blank for unused paging zones.
Usage
Enter the maximum number of seconds you want any page to last.
The field cannot be blank when you administer voice paging.
Loudspeaker Paging
Issue 2.1 May 2006 1293