Mf Interdigit Timer (Sec); Outgoing Shuttle Exchange Cycle Timer (Sec); Upper Bound (Msec) - Avaya Communication Manager Administrator's Manual

MF Interdigit Timer (sec)

Applies only to multifrequency signaling trunks. Specify the maximum number of seconds
Communication Manager will wait for the first forward signal (digit) to arrive, and for subsequent
digits to arrive. Intercept returns to the calling party if this timer expires.
Valid entries
1 to 255

Outgoing Shuttle Exchange Cycle Timer (sec)

Appears when the Incoming Call Type field is group-ii-mfc or non-group-ii-mfc and the
Outgoing Call Type field is group-ii-mfc or none on the Multifrequency-Signaling-Related
System Parameters screen. This field applies only to multifrequency signaling calls made from
Avaya Communication Manager.
Valid entries
1 to 25

Upper Bound (msec)

Specifies the upper bound of the flashhook interval. Specifies the upper bound of the
station-to-switch recall signal timing interval in milliseconds. Appears when the Flashhook
Interval field is y.
Valid entries
80 to 1250 (in
increments of
10).
Usage
This number must be less than the number of seconds entered in the
short interdigit timer.
Usage
Enter the number of seconds to time an exchange cycle (starts when the
far end requests a digit until Avaya Communication Manager sends the
requested digit).
Usage
A flash of 50 msec to 130 msec is always acceptable from a 2500-type set
regardless of the setting of the Upper and Lower bounds and will be
treated as the digit one.
Location Parameters
Issue 2.1 May 2006 1277