Avaya Communication Manager Administrator's Manual page 1446

Screen Reference
CDR Privacy
This option allows digits in the called number field of an outgoing call record to be blanked, on a
per-station basis. You administer the number of blocked digits system-wide in the Privacy -
Digits to Hide field on the CDR System Parameters screen.
Valid entries
y/n
Cell Phone Number
Contains the unformatted cell telephone's published external number. This field can contain a
3-digit area code plus the 7-digit main number. If the same Cell Phone Number is administered
on multiple XMOBILE station screens, then the Dial Prefix associated with each instance of the
Cell Phone Number must be the same.
Valid entries
0 to 9
Conf/Trans On Primary Appearance
This field controls whether a DCP or 46xx station permits transfer and conference.
Valid entries
y
n
Configuration Set
This field is used to administer the Configuration Set number that contains the call treatment
options desired for the XMOBILE station. This field must be administered if:
The XMOBILE Type field is EC500.
●
The Mobility Trunk Group field is a trunk group number and the administered trunk group
●
is non-DECT or non-PHS.
The Mobility Trunk Group field is aar or ars.
●
1446 Administrator Guide for Avaya Communication Manager
Usage
Enter y to enable Call Privacy for each station.
Usage
Enter 1 to15 digits. Avaya recommends that you enter a full 10-digit Cell
Phone Number regardless of whether the cell telephone is local or not.
Note that your ARS screen has to be administered to handle this.
Usage
The primary call appearance is activated for a transfer or conference.
An idle bridge appearance is used for a transfer or conference.