Avaya Communication Manager Administrator's Manual page 1373

TN
Valid entries
1 to 20 (DEFINITY CSI)
1 to 100 (S8300/S8700 Media Servers)
Width
Enter the number of adjacent DS0 ports beginning with the specified Starting Port, that make up
the PRI Endpoint.This field cannot be blank.
Valid entries
1 to 31
WIDEBAND SUPPORT OPTIONS
Contiguous
Specifies whether to hunt contiguous NXDS0 channels. This field only appears if y is entered in
NXDS0. The hunt algorithm to satisfy an NXDS0 call is as follows:
Valid entries
y/n
n
Usage
A width of 6 defines a PRI Endpoint that can support data rates up to 384
Kbps.
Usage
Enter y to specify the "floating" scheme. NXDS0 calls are placed on a
contiguous group of B-channels large enough to satisfy the requested
bandwidth without constraint on the starting channel (no fixed starting
point trunk).
Enter n to specify the "flexible" scheme. NXDS0 calls are placed on any
set of B-channels on the same facility as long as the requested bandwidth
is satisfied. There are no constraints, such as contiguity of B-channels or
fixed starting points.
Usage
Enter the Tenant Partition number.
Issue 2.1 May 2006
PRI Endpoint
1373