Avaya Communication Manager Administrator's Manual page 1647

Path Replacement with Retention
Appears when the following fields are set on the Trunk Group screen: trunk Group Type is
ISDN, Supplementary Service Protocol is b or e, and the Supplementary Services with
Rerouting field or the DCS with Rerouting field on the
Customer-Options
Valid entries
y/n
PBX ID
Appears when the Used for DCS field is y. This field identifies the remote switch in the network
with which the trunk will communicate on a DCS signaling link.
Valid entries
1 to 63 or blank
Per Call CPN Blocking Code
For Access, APLT, CO, DIOD, FX, tandem, tie, and WATS trunk groups only.
Valid entries
1 to 4 digit number or blank
*, #
Per Call CPN Unblocking Code
For access, APLT, CO, DIOD, FX, tandem, tie, and WATS trunk groups only.
Valid entries
1 to 4 digit number or blank
*, #
screen is y.
Usage
Enter y to retain the original trunk group. Set to n to allow path
replacement according to setting on the Path Replacement Method field.
Usage
Enter the ID of the switch at the other end of this trunk.
Usage
Can be used as the first digit
Usage
Can be used as the first digit
System-Parameters
Issue 2.1 May 2006
Trunk Group
1647