Survivable Processor - Avaya Communication Manager Administrator's Manual

Screen Reference

Survivable Processor

Use the Survivable Processor screen to add information specific to a Local Survivable
Processor (LSP) or to connect certain adjuncts to an LSP or an ESS server. Before
administering this screen, you must first assign node names for each LSP and ESS media
server on the IP Node Names
While this screen is administered on the active main server, the information entered applies only
to LSPs and ESSs and does not apply to main servers. When translations are copied to an LSP
or ESS, the LSP/ESS replaces like translations for the main server with the overrides
administered on the Survivable Processor screens. That is, use the Survivable Processor
screen to administer overrides against adjunct links that have already been administered for the
main server(s). For more information on Processor Ethernet, see
Ethernet on page 576. For more information about ESS, see Using the Avaya Enterprise
Survivable Servers (ESS), 03-300428.
Note:
The ESS server is first administered on the
Note:
the
Survivable Processor screen. The information from the
ESS
not need to use the Survivable Processor screen for an ESS server unless one
of the supported adjuncts connects to the PE interface of the ESS server.
Field descriptions for page 1
The first page of the Survivable Processor screen displays the Processor Ethernet interface
information for the LSP or the ESS server. The information includes the node name, the IP
address, the server type, the cluster ID, and the network region. The only administrable field on
this page is the Network Region field.
1494 Administrator Guide for Avaya Communication Manager
screen.
System Parameters - ESS
screen is automatically copied to the Survivable Processor screen. You do
IP Node Names
screen before it is administered on the
Setting up Processor
screen and then on
System Parameters -