Avaya Communication Manager Administrator's Manual page 1443

If Bridged Call Alerting is n and Per Button Ring Control is n, audible ringing is suppressed
for incoming calls on bridged appearances of another telephone's primary extension.
Valid entries
y
n
Bridged Idle Line Preference
When the telephone is idle, this field controls whether the user must push a button to answer a
bridged call, or whether the user can just take the telephone receiver off hook to answer a
bridged call.
Valid entries
y
n
Building
Enter a valid building location. See
Busy Auto Callback without Flash
Appears on the Station screen for analog telephones, only if the Without Flash field in the
ANALOG BUSY AUTO CALLBACK section of the Feature-Related System Parameters
screen is set to y. The Busy Auto Callback without Flash field then defaults to y for all analog
telephones that allow Analog Automatic Callback.
Valid entries
y/n
Usage
Incoming calls to a bridged appearance on a DCP or 46xx station require
the bridged appearance button to be pushed to answer the call.
Allows an incoming call on a bridged appearance to be answered with
either an off hook or a button push.
Usage
To answer a bridged call, the user must lift the telephone receiver, then
press the lighted bridged appearance button to connect to the call.
To answer a bridged call, the user can simply lift the telephone receiver to
connect the call.
Site Data
Usage
Enter y to provide automatic callback for a calling analog station without
flashing the hook.
on page 1432 for valid entries.
Station
Issue 2.1 May 2006 1443