Avaya Communication Manager Administrator's Manual page 1215

Figure 424: QSIG Trunk Group Options screen
add trunk-group next
Display Forwarding Party Name? y
Character Set for QSIG Name: eurofont
Display Forwarding Party Name
This field appears only when Group Type is isdn and Supplementary Service Protocol is b.
Valid entries
y/n
Character Set for QSIG Name
This field appears only when Group Type is isdn, Supplementary Service Protocol is b, and
Display Character Set on the
Valid entries
eurofont
iso-8859-1
QSIG Trunk Group Options
Usage
Enter y to display the name of the party who is forwarding the call.
Default is y.
System Parameters Country-Options
Usage
The Roman Eurofont character set. This is the default.
NOTE: Avaya BRI stations support ASCII characters only. They do not
support non-ASCII characters, such as Eurofont or Kanafont.
Therefore, if you use non-ASCII characters in any Communication
Manager Name field, such characters will not display correctly on a BRI
station.
All data (i.e., characters) in the Name value transmitted over QSIG are
converted from Eurofont (Avaya proprietary encoding) to ISO 8859-1.
Note: ISO 8859-1, more formally known as ISO/IEC 8859-1, or less
formally as Latin-1, is part 1 of ISO/IEC 8859, a standard character
encoding defined by ISO. It encodes what it refers to as Latin alphabet
no. 1, consisting of 191 characters from the Latin script, each encoded
as a single 8-bit code value.
ISDN Trunk Group
Page x of y
screen is Roman.
Issue 2.1 May 2006 1215