Avaya Communication Manager Administrator's Manual page 1134

Screen Reference
Allow Direct-IP Multimedia
Valid entries
y/n
Clear-channel
For more information on Clear Channel, see Administration for Network Connectivity for Avaya
Communication Manager, 555-233-504.
Valid entries
y/n
FAX Mode
Valid entries
off
relay
pass-through
t.38-standard
1134 Administrator Guide for Avaya Communication Manager
Usage
Enter y to allow direct multimedia via the following codecs:
H.261
●
H.263
●
H.264 (video)
●
H.224
●
H.224.1 (data, far-end camera control).
●
Usage
Enter y to indicate that this codec set supports BRI data calls.
Note: Clear Channel data transmission is supported on the TN2602AP IP
Media Resource 320 circuit pack and the TN2302AP circuit pack.
Usage
Turn off special fax handling when using this codec set. In this case, the
fax is treated like an ordinary voice call.
With a codec set that uses G.711, this setting is required to send faxes to
non-Avaya systems that do not support T.38 fax.
For users in regions using this codec, use Avaya relay mode for fax
transmissions over IP network facilities. This is the default for new
installations and upgrades to Communication Manager R2.1.
For users in regions using this codec, use pass-through mode for fax
transmissions over IP network facilities. This mode uses G.711-like
encoding.
For users in regions using this codec, use T.38 standard signaling for fax
transmissions over IP network facilities.