Avaya Communication Manager Administrator's Manual page 1396

Screen Reference
Valid entries
','
+
%
!
&
p
ITC (Information Transfer Capability)
Use Information Transfer Capability (ITC) to identify the type of data transmission or traffic that
this routing preference can carry. The ITC applies only to data calls (BCC 1 through 4).
This field must be unre or both if the BCC is y and the BCC value is W
Valid entries
both
rest(ricted)
unre(stricted)
1396 Administrator Guide for Avaya Communication Manager
Usage
Use 2 places. Creates a 1.5 second pause between digits being sent. Do
not use as the first character in the string unless absolutely necessary.
Misuse can result in some calls, such as Abbreviated Dialing or Last
Number Dialed, not completing.
Wait for dial tone up to the Off Premises Tone Detection Timer and then
send digits or intercept tone based on Out Pulse Without Tone y/n on
the Feature-Related System Parameters screen.
Start End-to-End Signaling.
Wait for dial tone without timeout and then send DTMF digits.
Wait for ANI (used for Russian pulse trunks)
The associated trunk group must be of type sip. Enter the single digit p
for fully qualified E.164 numbers. The p is translated to a + and is
prepended to the digit string.
Usage
Calls from restricted and unrestricted endpoints can access the route
pattern.
Calls from restricted endpoints can access the route pattern.
Calls from unrestricted endpoints can access the route pattern.
2 of 2