Avaya Communication Manager Administrator's Manual page 1128

Screen Reference
To IP Address or Subnet Mask
The end of the IP address range can be specified by either entering the last IP address in the
range or the From IP Address and the number of bits of the subnet mask.
If the Subnet Mask field is used, then:
The mask is applied to the From IP Address field, placing zeros in the non-masked
●
rightmost bits. This becomes the stored "From" address.
The mask is applied to the To IP Address field, placing 1's in the non-masked rightmost
●
bits. This becomes the stored "To" address.
If this field and the To IP Address fields are blank when submitted, the address in the From IP
Address field is copied into the To IP Address field.
Valid entries
0 to 32 or blank
Region
Identifies the network region for the IP address range.
Valid entries
1 to 250
VLAN
Sends VLAN instructions to IP endpoints such as IP telephones and softphones. This field does
not send VLAN instructions to the PROCR (S8300/S8700 Media Servers), CLAN, and Media
Processor boards.
Valid entries
0 to 4094
n
1128 Administrator Guide for Avaya Communication Manager
Usage
Enter the last IP address in the range or the From IP Address and the
number of bits of the subnet mask.
Usage
Enter the network region number for this interface.
This field must contain a non-blank value if the From IP Address field on
the same row contains a non-blank value.
Usage
Specifies the virtual LAN value.
Disabled