Avaya Communication Manager Administrator's Manual page 1500

Screen Reference
Enabled
Use this field to specify how data for each specified service type is transferred to the survivable
processor.
Valid entries
i(nherit)
n(o)
o(verwrite)
Local Node
This display-only field contains the node name as defined on the
Local Port
This display-only field contains the originating port number. For client applications such as Call
Detail Recording (CDR), this field defaults to 0.
Remote Node
This field becomes editable when you enter o(verwrite) in the Enable field. Specify the name at
the far end of the link for the CDR. The remote node should not be defined as a link on the
Interfaces or Data Module
1500 Administrator Guide for Avaya Communication Manager
Usage
Enter i(nherit) to indicate that this link is to be inherited by the LSP or
ESS server. When you enter i(nherit), all fields in the row for this service
type change to display-only. The survivable processor inherits this service
type just as it is administered on the main server. You generally use the
i(nherit) option in the following situations:
The main server connects to the CDR and/or the AE Services using
●
a CLAN and you want the ESS server to use the same connectivity
The main server connects to the CDR and/or the AE Services using
●
the main server's PE interface and you want the LSP or ESS server
to connect to the adjunct using its PE interface
This IP services link is disabled on the LSP or the ESS server. This is the
default.
Enter o(verwrite) to overwrite the processor channel information sent in
the file sync from the main server. The overwrite option allows the
administered CDR or AE Services attributes to be modified uniquely for
each individual LSP or ESS server. Entering o(verwrite) causes the
Local Node field to change to procr. Use the remaining editable fields to
enter the information for the LSP or ESS server.
screens. This field does not apply for AESVCS.
IP Node Names screen.
IP