System Parameters - Multifrequency Signaling; System Parameters Ocm Call Classification - Avaya Communication Manager Administrator's Manual

System Parameters - Multifrequency Signaling

See Multifrequency-Signaling-Related

System Parameters OCM Call Classification

This screen enters the tone characteristics for your country for Outbound Call Management
(OCM) applications. It is not required for United States OCM applications. If you cannot access
this screen, contact your Avaya technical support representative.
This screen appears when Global Call Classification field on the
Customer-Options
loop-start Trunks field on the System Parameters Country Options screen is set to y. This
screen defines the busy tone and cadence and can be administered with up to 4 on and off
steps, which is four valid cycles to determine busy tone.
Avaya recommends that you use a minimum of two on and off steps to determine a valid busy
tone. If the cadence is administered with one on and off step, any time the classifier hears the
cadence it is considered BTD signal.
Field descriptions for page 1
Figure 571: System Parameters OCM Call Classification screen
TONE DETECTION PARAMETERS
Global Classifier Adjustment (dB): ___
Parameters.
screen is set to y, or when the Enable Busy Tone Disconnect for Analog
SYSTEM PARAMETERS OCM CALL CLASSIFICATION
USA Default Algorithm? _n_
USA SIT Algorithm? ___
System Parameters - Multifrequency Signaling
System-Parameters
Issue 2.1 May 2006
Page 1 of x
1565