Avaya Communication Manager Administrator's Manual page 1662

Screen Reference
Outgoing Rotary Dial Interdigit (msec)
This field only appears when:
1. the trunk group Group Type field is access, aplt, co, diod, dmi-bos, fx, rlt, tandem, or
wats and the Outgoing Dial Type field is rotary.
2. the Group Type field is tie, the Trunk Type field is blank, cont, or dis, and the Outgoing
Dial Type field is rotary.
3. the Group Type field is tie, and the Trunk Type field is tge, tgi, or tru (the Outgoing Dial
Type field does not appear but is implied to be rotary).
Valid entries
150 to 2550 in
increments of 10
Outgoing Seizure (msec)
Appears when the Country field is 15, the Direction field is outgoing or two-way, and the
Trunk Type field is 2-wire-ac, 2-wire-dc, or 3-wire. This timer is sent only to the TN2199 circuit
pack.
Valid entries
20 to 2550 in
increments of 10
Outgoing Seizure Response (sec)
This timer is sent to the TN438B, TN439, TN447, TN458, TN464B (or later), TN465B (or later),
TN767, TN2140, TN2147, TN2184, TN2199, and TN2242 circuit packs.
Valid entries
1 to 255 in
increments of 1
1662 Administrator Guide for Avaya Communication Manager
Usage
Enter the minimum time between outpulsed digits on outgoing rotary
trunks.
Usage
Enter the duration of the outgoing seizure signal.
Usage
Enter the maximum interval that Communication Manager should wait
after sending a seizure signal to receive seizure acknowledgment from
the far-end. If the acknowledgment is not received in this time, a seizure
failure response is uplinked. For Brazil pulsed E&M signaling, use 255.