Avaya Communication Manager Administrator's Manual page 1447

If the Mobility Trunk Group field is a trunk group number and the administered trunk group is
DECT or PHS, this field can be left blank.
Valid entries
1 to 10 or blank
COR
Enter a Class of Restriction (COR) number to select the desired restriction.
Cord Length
Enter a number to specify the length of the cord attached to the receiver. This is a free-form
entry, and can be in any measurement units.
COS
Enter the desired Class of Service (COS) number to select allowed features.
Country Protocol
Enter the protocol that corresponds to your supported initialization and codesets. The Country
Protocol must match any previously-administered endpoint on the same port.
Valid entries
1
2
etsi
3
6
Usage
Enter any value corresponding to the appropriate Configuration Set
screen.
Usage
United States (Bellcore National ISDN)
Australia
ETSI (Europe)
Japan
Singapore
Station
Issue 2.1 May 2006 1447